Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 28 cm Micro USB to USB A power cable with an inline on/off switch for USB lamps, fans and similar devices — data lines are not connected
This 28cm USB cable adds an on/off toggle between a USB-A male plug and a USB-A female socket. It lets you control power to USB lamps, fans or similar low-current accessories without unplugging them. The switch interrupts only the power lines; data lines are not connected through the cable. It is intended for simple DC power switching in hobbyist or peripheral setups.
The copper conductors are rated for a maximum continuous current of 2 Amps. Under steady load the cable delivers power to attached devices while the switch remains closed. Because the data lines are absent, there is no signalling overhead or enumeration delay when the switch is toggled. The short 28cm length keeps voltage drop minimal for the rated current.
The cable carries only VBUS and ground; D+ and D- are not wired, so it cannot transfer data or negotiate higher USB power profiles. Devices that require data handshake for charging or firmware updates will not function through this cable. It suits basic LED lighting, small fans or microcontroller boards powered from a fixed 5 V source. Buyers needing data connectivity or fast-charging negotiation should choose a fully wired USB cable.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
The cable itself is a passive copper conductor rated for up to 2 Amps, so it adds no active power draw or heat beyond the connected device's normal consumption.
You need a USB-A power source such as a charger, power bank or computer port, plus a Micro-USB device like a lamp, fan, Raspberry Pi or Arduino board.
Yes, the USB-A male plug and Micro-USB female socket are backward-compatible with legacy USB 2.0 ports, though the data lines are not connected so it only supplies power.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?