Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Expands one motherboard PWM header to five or eight fans with 40 or 50 cm sleeved cable and Molex power
This PWM fan hub expands a single motherboard PWM header to control multiple cooling fans. Two versions are available: a five-port model with a 40cm cable and an eight-port model with a 50cm cable. Both draw 12V power directly from a PSU Molex LP4 connector. They suit builders who need to run several fans from one header.
Only the first port labelled CPU Fan passes an RPM signal back to the motherboard. All other ports share the same PWM signal, so every connected fan runs at identical speed. Three-pin fans attached to the hub will spin at full speed because they lack PWM control. This design cannot report individual fan speeds or vary each fan independently.
The five-port hub comfortably handles up to five 12V fans while the eight-port version supports up to eight. Both rely on the PSU Molex connection for power headroom rather than the motherboard header. Builders needing more than eight fans or per-fan speed curves will require a different control solution.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Choose the 5-port version if you need to power up to five fans and prefer the shorter 40cm lead. Choose the 8-port version if you need up to eight fans and can use the longer 50cm lead. Both draw 12V power from a Molex connector.
All connected PWM fans follow the same signal from the motherboard header, so they run at identical speeds. The motherboard only reads the RPM from the fan plugged into the first CPU Fan port.
The hub takes 12V solely from a PSU Molex LP4 4-pin connector. This supplies power to every attached fan while the motherboard header only provides the control signal.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?