Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
SATA power cable for HP EliteDesk 600, 800 and 400 G1 G2 SFF models using part numbers 710825-001 or 710825-002
This cable delivers SATA power inside HP EliteDesk 600, 800 and 400 G1 G2 small-form-factor desktops. It matches part numbers 710825-002 and 710825-001, with the exact variant shipped at random unless a specific request is noted. The Micro USB to USB A connector layout is tailored to the proprietary power routing in these chassis. Builders working on other platforms or needing a standard SATA power lead cannot use this cable.
The cable carries only the SATA power lines required by the installed drive or adapter, adding no active components that generate heat or noise. Power draw is determined entirely by the connected device and the desktop's own supply. Because the cable is passive, it introduces no additional thermal load or audible signature during normal operation.
No accessories, adapters or software are included with the cable. The sole item is the SATA power lead itself, tested to 100 percent before shipment. Compatibility is limited to the listed EliteDesk models; no driver installation or configuration utility is required or provided.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Thread the cable along the chassis rail toward the drive bay, keep the Micro USB plug oriented toward the motherboard header, and secure the USB-A end with the existing tie-down point so the SATA power lead sits flat against the drive.
Inspect the Micro USB port for bent pins and the USB-A shell for spread contacts; replace the cable if either connector feels loose or shows visible metal fatigue.
The thin-gauge conductors will show measurable drop once the drive draws continuous current near its rated spin-up level, so limit cable length to the factory routing path.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?