BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Hifree
Kit of 25 reusable vacuum bags (32 × 34 cm) with USB pump and five clips stores 0.5, .75 and 1 kg filament spools light-proof and humidity-resistant
The Hifree kit contains 25 reusable vacuum bags sized 32 by 34 cm (12.6 by 13.4 in). They accept 1.75 mm, 2.85 mm and 3 mm filaments in 0.5 kg, 0.75 kg and 1 kg spools. The bags suit PA, PC, PLA, ABS, TPU, ASA, PETG and other common materials. Each bag uses a black and transparent dual-sided design that blocks light on one side while letting you inspect the spool through the other.
One USB-powered vacuum pump draws air from the valve in about 12 seconds and stops automatically. It runs from any USB port, including power banks and laptops, so no mains adapter is needed. Five sealing clips lock the bag opening before evacuation, creating a repeatable seal that resists punctures thanks to the thick PA+PE composite film. The kit replaces single-use desiccant packs with a reusable humidity barrier.
Press the valve flat, align the pump nozzle, then hold for 12 seconds until the pump halts. The process is quick, but the clip must sit squarely across the full width of the bag or air will leak back in. Overfilling a bag above the spool height can also prevent the valve from seating properly. Users who skip the flat-valve step often blame the pump when the seal fails.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Hifree |
| Part number | 25PCS 3D Filament Storage Bags |
| Compatibility | |
| Compatible systems | Convenient pack of 25, high-quality material |
The kit includes five sealing clips made for repeated use; swap a clip only if the hinge loosens or the teeth no longer grip the bag edge.
Each 32 by 34 centimetre bag fits one 0.5, 0.75 or 1 kilogram spool in 1.75, 2.85 or 3 millimetre diameters.
The pump runs on any USB port and stops automatically after roughly 12 seconds per bag, so it stays cool and quiet even with back-to-back use.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?