Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
150 W replacement lamp module with 2 000-hour rated life for Hitachi projectors
The Hitachi DT00665 is a complete lamp-and-housing assembly rated at 150 W and 2,000 hours of rated life. It ships fully assembled so the projector can be back in service without separate bulb handling. The unit is manufactured to ISO 9001 quality standards and uses a genuine Philips UHB bulb.
When the existing lamp reaches the end of its rated hours the image loses intensity and colour accuracy. Swapping in this module returns the projector to its factory light output and avoids the colour shift that appears when a bulb is run past its specified life. The upgrade is worthwhile once the on-screen timer approaches the 2,000-hour mark or a replacement warning appears.
The housing slides into the lamp compartment and locks with the projector’s built-in latch, so no screwdriver is required for the majority of compatible units. The most common issue is forgetting to reset the lamp-hour counter in the on-screen menu, which leaves the replacement warning active. Dust on the new lens surface can also cause hot-spots, so a quick blast of compressed air before closing the door prevents that problem.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 150 W |
The DT00665 module fits Hitachi projectors that specify this part number; check your projector manual to confirm compatibility before ordering.
Power off and cool the projector, remove the lamp cover, slide out the old module, insert the new DT00665 until it clicks, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the common error.
Replace the lamp after roughly 2000 hours of use or when brightness drops noticeably, whichever occurs first.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?