Holland Electronics HFS-3D 3-Way Splitter 2150 MHz Red
A 5–2150 MHz three-way RF splitter with solder-back shielding exceeding 130 dB, flat F ports spaced 1" apart, and diode-protected DC pass-through rated for 35 V and 1.0 A across –40 °C to 60 °C
- Product colorRed
- Product weight0.2
- Wideband 5-2150 MHz covers cable, satellite and data
- Higher return loss reduces signal reflections on every port
- Ultra-flat response keeps levels even across the band
- Solder-back sealed housing delivers 140 dB RFI shielding
- Diode-protected circuitry passes DC power from any output to the input
Three-Way RF Splitter for Cable and Satellite
The Holland HFS-3D splits a single coaxial feed into three outputs across a 5 to 2150 MHz range. It serves residential and commercial installations that distribute cable TV or satellite signals to multiple rooms. The red housing identifies the model at a glance.
Sustained Distribution Performance
Ultra-flat response keeps signal levels even across the full bandwidth during continuous operation. Higher return loss reduces reflections that can degrade picture quality over long cable runs. Solder-back construction maintains 140 dB RFI shielding without degradation over time.
Thermal and Power Characteristics
The unit operates from -40°C to +60°C without active cooling. Diode-protected circuitry passes DC power up to 35 V and 1.0 A from any output port back to the input for line-powered amplifiers. Impedance is 75 ohms with port spacing of 1 inch.
How it compares
Measured against everything we stock in HDMI, VGA & USB Splitters, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 88% of the 232 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Holland Electronics |
| Model name | 3-WaySplitterV1 |
| Part number | HFS-3D |
| Product color | Red |
Questions about this item
Does the splitter generate heat or noise when it runs continuously?
It is a passive component with no fan or active circuitry, so it produces no audible noise and negligible heat during all-day operation.
What cables or connectors must I already have to use the three output ports?
Each port uses a standard 75-ohm F-type connector spaced one inch apart, so you need three coaxial cables with matching F plugs.
Will it work with older 75-ohm coax runs and legacy set-top boxes?
Yes, the 5–2150 MHz bandwidth and 75-ohm impedance match traditional cable-TV and satellite installations, and the solder-back housing provides over 130 dB RFI shielding for clean signals on aged wiring.
More in HDMI, VGA & USB Splitters
Similar items
Antronix CMC2004H 3-Pack 4-Way Horizontal Splitter 7dB 5-1002 MHz
- Black
ATEN VS172 2-Port DVI Dual Link Splitter with Audio
- DVI
- Connectors, Video I…
Extreme MoCA POE-BB1SP-VF Splitter 6kV Surge Protection Silver
- Silver





