Holland Electronics SBD Sub-Band CATV Separator/Joiner Blue
A sub-band diplexer that combines off-air antenna and satellite signals onto one coaxial line or separates them at the far end, operating from 40 to 2250 MHz with 75 OHM terminators
- Product colorBlue
- Product weight0.15
- Separates or combines antenna and satellite signals on one coaxial line
- Single-cable installation simplifies local HDTV digital channel reception
- Minimises off-air analog signal loss for cleaner picture quality
- Converts one-way amplifiers to two-way operation at the head-end
- Low-loss sub-band insertion across 40-2250 MHz range
Signal Combining and Separation
The Holland Electronics SBD Sub-Band CATV Separator/Joiner is a high performance diplexer designed for professional video distribution. It separates or combines off-air TV antenna and satellite signals onto a single coaxial feed line. Installers use one unit at each end of the cable run to merge and then split the signals. This device supports a single line installation for local HDTV digital channels.
Blue Housing with 75 Ohm Termination
The unit features a blue coloured housing and weighs 0.15. It operates across a 40-2250 MHz range with 75OHM terminators that insert off-air signals into four outputs of Phase III LNBFs. The design minimises off-air analog signal loss during the combining or splitting process. It connects an off-air antenna to a 1820DISH system efficiently.
Passive Operation and Return Path Support
As a passive diplexer, it draws no power and generates no noise or heat during normal use. The device allows one-way amplifiers to become two-way by separating return signals on head-ends. It provides low loss sub-band signal insertion within the distribution system or at the head-end. This ensures clean signal paths without active thermal management.
How it compares
Measured against everything we stock in HDMI, VGA & USB Splitters, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 70% of the 232 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Holland Electronics |
| Model name | SBD |
| Part number | SBD |
| Product color | Blue |
Questions about this item
What frequency range does the SBD sub-band diplexer cover?
The diplexer operates from 40 to 2250 MHz, separating or combining off-air TV-antenna and satellite signals onto a single coaxial feed.
What impedance terminators are used on the SBD diplexer?
It uses 75 ohm terminators for inserting off-air signals into four outputs of Phase III LNBFs.
How many SBD diplexers are needed for a single-line installation?
You need two units — one to combine signals at the antenna end and another to split them at the receiver end.
More in HDMI, VGA & USB Splitters
Similar items
Vision 1MTo2F-30 3.5mm TRRS Splitter 1 Male to 2 Female
- HDMI
- 5.91 in × 4.53 in ×…
POHFP USB-3USB30CM-BLACK USB 2.0 Y Splitter 1 Male to 3 Female 30 cm Black
- 3, Black
- Black
ATEN VS172 2-Port DVI Dual Link Splitter with Audio
- DVI
- Connectors, Video I…





