HPE DL360 Gen10 8SFF 2x Xeon Silver 4210 2.2GHz 384GB DDR4 No Drive rack server
Dual Xeon Silver 4210 processors, 384GB DDR4 memory, eight 2.5-inch bays with P408 SAS controller and iLO Advanced remote management
- ProcessorIntel Xeon
- Installed RAM384 GB
- Type of memoryDDR4
- Processor speed2.2 GHz
- Installed CPUs2
- Max supported CPUs2
- Dual Xeon Silver 4210 CPUs provide 10 cores each at 2.2 GHz
- 384 GB DDR4 ECC memory supports large virtualisation workloads
- Smart Array P408 SAS controller manages up to eight 2.5" drive bays
- HPE iLO Advanced enables full remote server management
- Redundant 500 W power supplies maintain uptime during failures
Ready-to-Deploy Rack Server
The HPE DL360 Gen10 arrives as a configured 1U rackmount system with dual Xeon Silver 4210 processors at 2.2 GHz and 384 GB of DDR4 ECC registered memory. No drives are installed, so storage can be matched to the workload.
Suited For Virtualisation And Database Hosts
Organisations needing dense compute and large memory capacity in a single rack unit will find the 10-core CPUs and 3 TB maximum memory ceiling appropriate. Buyers who require internal drives, GPU acceleration, or a different processor generation should look at alternative configurations.
384 GB DDR4 Installed Memory
The system ships with 384 GB of DDR4 ECC registered RAM across the available DIMM slots. This capacity determines whether the server can hold the working set for intended applications before any memory expansion is considered.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $2,077.99
- Typical for this category: the median of 17,640 items is $1,910.99.
- Installed RAM 384 GB
- Higher than about 75% of the 15,103 comparable items (median 128 GB).
- Processor speed 2.2 GHz
- Lower than about 60% of the 9,950 comparable items (median 2.3 GHz).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Rack Mount |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor speed | 2.2 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 384 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 3 TB |
| Storage | |
| Installed storage | 16,00 |
| Disk controller | HPE Smart Array P408 SAS Controller |
| Drive interface | SATA |
| Graphics | |
| Graphics chip | Integrated Graphics |
| Size & build | |
| Product dimensions | 36 × 24 × 10 in |
| More details | |
| Management controller | HPE iLO Advanced |
Questions about this item
Which drive caddies or backplane do I need to populate the 8 SFF bays?
The chassis supports up to eight 2.5-inch drives and uses the installed Smart Array P408 SAS controller with SATA interface; matching HPE SFF caddies are required for each bay.
Will my existing DDR4 ECC registered modules work with the two Xeon Silver 4210 processors already installed?
Yes, the system runs 384 GB of DDR4 ECC registered memory across both CPUs; any additional modules must be DDR4 ECC registered to be compatible.
How can I confirm the iLO Advanced remote management is active after first power-on?
Connect the dedicated iLO network port, browse to its IP address, and verify the firmware version shown matches the latest stable release applied before shipment.
More in Rack & Tower Servers
Similar items
DELL PowerEdge T430 5U rack server 2× Xeon E5-2620 v4 2.1 GHz 32 GB DDR4 8× 8 TB SATA H730 2× 750 W PSU
- 5U
DELL PowerEdge R740 2U rack server 2x Silver 4210 10C 32GB 2x 2TB 7.2K SAS H740P
- Intel
- 32 GB
DELL PowerEdge R740xd 12LFF 2x Xeon Silver 4114 2.2GHz 384GB DDR4 No Drive
- Xeon
- 2.2 GHz





