HPE J9285D 10 Gbps SFP+ DAC Cable 7m
A 10 Gbps SFP+ direct-attach cable linking switches or transceivers over 22.97 ft, compatible with Aruba 8320 and 8400 series
- Form factorSFP+
- Product typeCable
- Transfer speed10 Gbit/s
- 10 Gbps direct-attach speed for low-latency links
- 7-metre reach connects adjacent racks without patch panels
- SFP+ both ends plug straight into Aruba 8320/8400 switches
- Passive copper design needs no external power supply
- Factory-new HPE part J9285D ready for immediate deployment
7-metre 10 Gbps SFP+ direct-attach cable
The HPE J9285D is a 7-metre SFP+ to SFP+ direct-attach copper cable rated for 10 Gbps. It connects two SFP+ ports on compatible switches or transceivers without separate optics. The cable suits data-centre racks where short-reach, low-latency links are required.
Passive copper construction for sustained throughput
As a passive DAC, the assembly contains no active electronics and draws no additional power from the port. Signal integrity is maintained across the full 22.97 ft length at the rated 10 Gbps, so sustained loads do not introduce the thermal throttling or latency variation seen with active cables.
SFP+ form-factor limits reach to short distances
The SFP+ direct-attach interface is defined for intra-rack or adjacent-rack connections and is not intended for longer runs. Compatibility is confirmed with Aruba 8320 and 8400 switch series; other SFP+ equipment must support passive copper at this length to operate correctly.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $161.99
- Pricier than about 54% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | HPE |
| Model name | J9285D |
| Product type | Cable |
| Performance | |
| Transfer speed | 10 Gbit/s |
| Size & build | |
| Form factor | SFP+ |
| Shipping weight | 0.35 kg |
| Package size | 279 × 241 × 13 mm |
Questions about this item
Does the 7 m HPE J9285D DAC generate noticeable heat or draw extra power when running continuously?
As a passive direct-attach copper cable it has no active electronics, so it produces no measurable heat and draws no power beyond the negligible resistance of the copper conductors.
What SFP+ ports must my equipment provide for this cable to plug in directly?
Both ends terminate in standard SFP+ network connectors, so each linked device — switch, transceiver or network card — needs an available SFP+ cage that accepts 10 Gbps modules.
Will this 7 m DAC work reliably with my Aruba 8320 or 8400 series switches alongside older 1 Gbps SFP modules?
The cable is listed as compatible with Aruba 8320 and 8400 switch series; those ports auto-negotiate speed, so 1 Gbps SFP modules in neighbouring slots will operate independently at their rated rate.
More in SFP & SFP+ Transceiver Modules
Similar items
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Allied Telesis AT-DMC100/SC-90 SFP transceiver 100Base-FX
- Network Technology:…
AddOn J4858C-AO SFP transceiver 1000Base-SX 850nm 550m LC
- Transceiver
- TCP/IP
PC Wholesale JD094B 10GBASE-LR SFP+ Transceiver 10km 1310nm
- 10GBase-LR
- Transceiver





