HPE JH693A X240 10G SFP+ to SFP+ 0.65m DAC SFP transceiver
A 0.65 metre direct-attach copper cable linking two SFP+ ports at 10 Gbps
- 10 Gbps direct connection via 0.65 m copper link
- 25 GB/s throughput for short-range campus links
- 13 ft length fits tight rack spacing
- HPE X240 compatibility simplifies SFP+ port pairing
- New condition ensures factory-tested reliability
Product identity and fit
The HPE JH693A X240 is a 10G SFP+ to SFP+ direct attach copper cable measuring 0.65m in length. It provides a fixed 10 Gbps link between two SFP+ ports on compatible network devices such as switches or servers. This passive twinax assembly is intended for short reach connections inside a rack or between adjacent racks. Buyers needing longer reach or fibre media should consider other media types.
Pre order checks
Verify that both endpoints have SFP+ cages that accept passive direct attach copper cables and that the link speed is negotiated at 10 Gbps. Confirm the 0.65m length matches the physical spacing between the two ports; the cable cannot be extended or cut. Check that the switch or server firmware lists the JH693A as a supported part number to avoid compatibility errors. Ensure no active optical transceiver is required for the intended port configuration.
Sustained load behaviour
The passive copper construction carries the 10 Gbps signal without on board electronics, so power draw remains negligible and latency is minimal. Heat generation is limited to the conductor resistance, allowing continuous line rate traffic without thermal throttling. The fixed 1.25 GB/s throughput is maintained as long as the link remains up and the connected ports operate within specification. No active cooling or firmware management is required during prolonged operation.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $97.99
- Cheaper than about 58% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | HPE |
| Size & build | |
| Shipping weight | 0.33 kg |
| Package size | 330 × 254 × 51 mm |
Questions about this item
Does the HPE JH693A come with any additional cables or modules, or is the direct attach copper cable the only item included?
The HPE JH693A is a complete direct attach copper cable assembly with SFP+ connectors on both ends. No separate transceivers or patch cables are required for a 10G link.
The product title lists X240 and 0.65m — are there other length or speed variants under the same model number?
JH693A identifies this specific 0.65 metre, 10G SFP+ to SFP+ assembly. Different lengths or speed ratings carry different HPE part numbers.
The spec sheet shows 1.25 GB/s — what actual throughput should I expect when the cable is plugged into two 10G SFP+ ports?
The 1.25 GB/s figure represents the serial lane rate. A 10G Ethernet link over this DAC delivers up to 10 Gb/s of user data throughput.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH ET91000SFP2C SFP transceiver card module open slot Gigabit Ethernet fiber media converter
- 1 - SFP Slot Female…
- Converter
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
AddOn DS-SFP-FC8G-SW-AO 8Gb 850nm 150m SFP+ transceiver
- SFP+
- Cisco®
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Axiom GLC-TE-AX 1000Base-T SFP Transceiver 40km
- Transceiver
- 1310 nm





