Icomroad PD-65W 65 W GaN 3-port charger
A 65 W GaN wall charger with two USB-C and one USB-A port powers up to three devices at once, delivering 65 W to a single laptop or splitting 45 W plus 20 W across two ports
- Product typeGaN Charger
- Product colorWhite
- Charges one device at up to 65 W for fast laptop power
- Three ports share power intelligently so every device gets the best charge
- GaN chip cuts heat and keeps charging stable and efficient
- Foldable plug makes it smaller and lighter than a traditional laptop charger
- Built-in safeguards prevent over-voltage over-current and over-heating for safe charging
Three-port GaN charger for travel
This compact 65 W GaN charger powers up to three devices from a single wall outlet. It suits travellers and commuters who carry a laptop, phone and tablet but want to leave bulky power bricks behind. The foldable plug keeps the unit small in a bag or pocket.
Thermals, noise and power draw
Third-generation GaN circuitry reduces heat compared with older silicon designs, so the charger stays cooler during typical daily use. No fan is present, making operation completely silent. Input rating is 100-240 V 1.2 A, drawing only the power needed for the connected devices.
Sustained-load behaviour
When one device uses the PD1 port alone it can receive up to 65 W continuously. With two or three devices attached, Smart Power Distribution reallocates output — for example 45 W plus 20 W on the two USB-C ports — and Smart Vortex Mode tapers current after 80 per cent charge to protect battery health over long sessions.
How it compares
Measured against everything we stock in Charging Stations & Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 60% of the 9,265 comparable items (median $17.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | GaN Charger |
| Product color | White |
Questions about this item
How do I plug the Icomroad PD-65W into a wall outlet and which port should I use for 65 W single-device charging?
Fold out the built-in prongs, insert the charger into a 100-240 V AC socket, then connect your device to the PD1 USB-C port using a cable rated for at least 65 W; PD1 alone delivers up to 65 W while PD2 and USB-A are limited to 30 W and 18 W respectively.
What part of the Icomroad PD-65W is most likely to wear out first and need replacement?
The foldable AC prongs and the USB-C port springs endure the most mechanical stress from daily plugging and unplugging; the GaN circuitry itself has no moving parts and is rated for long-term use.
At what battery level does the Icomroad PD-65W change its charging behaviour to protect long-term health?
When a connected device reaches roughly 80 per cent charge, Smart Vortex Mode reduces the power flow to extend battery lifespan, then resumes normal output once the level drops.
More in Charging Stations & Cables
Similar items
Mophie 401305902 15W wireless charging pad
- Universal
- Smartphones, iPhone…
HyperGear Chunky180° USB-C to USB-C 100W 6ft Orange
- Universal
- Universal





