IETS GT202UB vacuum laptop cooler with temperature display, 13 wind speeds 2600-5000RPM
Vacuum laptop cooler with temperature display and 13 wind speeds from 2600 to 5000 RPM
- Fan sizeAir vents within 3.3/3.4/4.6 in
- Accessory category43201619
- Largest supported size8 in (20.3 cm)
- Measurements4.699 cm × 10.795 cm × 18.6944 cm
- Fan quantity1
- Team affiliation1 Piece
- Rapid cooling with 2600-5000 RPM high-speed blower
- Automatic fan control via intelligent temperature detection
- Secure fit with retractable clip arm and three shroud sizes
- Dust-proof net reduces internal buildup for longer life
- Compact 0.249 kg design fits vents up to 4.6" x 1.6
Vacuum laptop cooler with temperature display
The IETS GT202UB is a vacuum-style laptop cooler designed for gaming notebooks that exhaust heat through side or rear vents. It clamps directly over the vent using a retractable clip arm and one of three supplied silicone shrouds to create a sealed airflow path. A built-in sensor reads exhaust temperature and automatically adjusts the single blower across 13 speed steps. The unit weighs 0.249 kilograms and measures 4.699 cm by 10.795 cm by 18.6944 cm.
Compatibility limits for side or rear vents
The cooler only works when the laptop vent dimensions fall within 4.6 inches wide by 1.6 inches high and the surrounding surface is flat enough for the adhesive mount. Shroud sizes correspond to air-vent openings of 3.3, 3.4 or 4.6 inches. If the vent sits on the rear panel, the screen angle stops at about 135 degrees. Laptops without a suitable side or rear exhaust, or with curved chassis near the vent, cannot use this cooler.
Upgrade from passive pads and low-RPM blowers
Traditional cooling pads typically spin below 1000 RPM and rely on loose airflow under the chassis. The GT202UB replaces them with a 2600 to 5000 RPM blower, a sealed silicone shroud and a low-resistance duct that pulls hot air directly from the exhaust port. The jump is worth it when thermal throttling appears under load and the laptop meets the vent-size and flat-surface requirements. Buyers whose machines lack a compatible vent or need multi-device flexibility should look elsewhere.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $52.99
- Pricier than about 90% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Brand name | IETS |
| Model name | GT202UB |
| Part number | GT202UB |
| Accessory category | 43201619 |
| Product color | GT202UB |
| Size & build | |
| Fan size | Air vents within 3.3/3.4/4.6 in |
| Measurements | 4.699 cm × 10.795 cm × 18.6944 cm |
| Fan quantity | 1 |
| Compatibility | |
| Largest supported size | 8 in (20.3 cm) |
| In the box | |
| In the box | No |
| More details | |
| Team affiliation | 1 Piece |
Questions about this item
Which size of the three silicon shrouds should I choose for my laptop?
Measure your exhaust vent; the shrouds cover vents up to about 4.6" long by 1.6" high, so pick the one that fully covers your vent without overhang.
What does the 5000 RPM maximum actually do once the cooler is attached?
The high-speed blower pulls hot air directly from the laptop's vent through a low-resistance duct, delivering far more airflow than typical coolers that spin under 1000 RPM.
How does the vacuum-seal connection affect compatibility with my laptop's vent?
The retractable clip arm and adhesive mount create a tight seal on flat surfaces beside vents up to 4.6" wide; rear vents will hold the lid at roughly 135 degrees.
More in Laptop Cooling Stands & Fans
Similar items
ENHANCE C11-CA Laptop Cooling Pad 6 Fans 15.6-17.3in Blue LED
- Cooler
- Support up to 17-in…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
KYOLLY laptop cooling pad 15.6-19.3" 2 fans 3000RPM 10 RGB modes 6 heights
- 7 in (17.8 cm)
- 10.795 cm × 35.9918…





