BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Green photopolymer resin for 405 nm LCD printers, 500 g bottle, 28–35 % elongation and 46–67 MPa tensile strength
This green photopolymer resin is formulated for 405 nm LCD printers that use LED UV light sources. It suits hobbyists and small-shop operators who need a standard material for general-purpose models. The 500 g bottle provides enough volume for multiple prints without frequent reordering. Low odour and non-toxic handling make it practical for home or office environments.
Users moving from entry-level resins that warp or leave sticky surfaces will notice tighter dimensional stability and a harder finish at 88 shore D. The jump is worth it when functional parts need tensile strength between 46 and 67 MPa and elongation at break of 28 to 35 percent. Builders who only print decorative miniatures may not require the extra mechanical headroom.
The resin cures only under 405 nm LED UV light, so it will not work with laser-based SLA or DLP systems that use different wavelengths. Viscosity and density of 1.08 to 1.13 g/cm³ mean thicker layers can trap bubbles if the printer lacks a robust peel mechanism. Large solid parts over several hundred grams may develop internal stress without hollowed designs and drain holes.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Inland |
The bottle measures 105.92 mm wide by 103.89 mm deep, so check your shelf clearance against those dimensions.
Shake the 500 g bottle thoroughly for several minutes to redistribute settled pigment, then let bubbles rise before pouring.
Replace it when the liquid thickens noticeably, develops a strong odor, or cured test pieces no longer reach the 28 to 35 % elongation range.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?