Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
PCIe 4.0 x8 gender changer with ReDriver extends signals to SFF-8674 connectors and supports bifurcation into two x4 links
The Innocard DP8710 converts a PCIe 4.0 x8 slot to two SFF-8674 Mini SAS HD connectors. It is built for system integrators who need to route eight lanes of Gen4 signals to external SAS cabling. The on-board ReDriver extends reach at 16 GT/s and the clock buffer drives longer cables. Bifurcation into two x4 links is supported.
The adapter draws 3.3 V from the slot through a TVS-protected load switch. No active cooling is fitted, so airflow in the chassis handles the modest heat from the ReDriver and buffer ICs. The card adds no fan noise and its power consumption stays within the slot budget for a passive Gen4 signal conditioner.
The board requires a free PCIe 4.0 x8 slot and 3.3 V standby power with TVS and load-switch protection already present. It frees the builder from running fragile high-speed traces to the rear panel by moving the SFF-8674 ports to the bracket. SMBus addresses 0x6C, 0x70 and 0x20 are reserved for clock, switch and expander functions. PERST#, WAKE# and CLKREQ# buffers maintain link stability over extended cable runs.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
Insert the card into a PCIe 4.0 x8 slot, connect external Mini SAS HD SFF-8674 cables to the built-in 1x2 4X connectors, and ensure the system supplies 3.3V power; the on-board ReDriver and clock buffer handle signal integrity for longer cables.
The adapter has no moving parts or field-replaceable components; the TVS diodes and load switch protect the 3.3V input, so only inspect cables and connectors periodically for physical damage or debris.
The 16 GT/s per lane signal quality over extended cable length is the limiting factor; the built-in ReDriver with programmable equalization and the 100 MHz clock buffer are designed to maintain link stability up to the cable's reach.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?