Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a Gen-Z 1C EDSFF SSD to a PCIe 4.0 x4 slot with integrated ReDriver and signal buffers for extended reach
The Innocard DP9504 converts a Gen-Z 1C EDSFF solid-state drive to a standard PCI Express 4.0 x4 add-in card slot. It integrates a PCIe ReDriver and clock buffer to maintain 16 GT/s signal integrity over longer traces. An SMBus I/O expander at address 0x41 handles power-disable and reset control for the EDSFF device. The card is designed and manufactured in Taiwan.
This adapter lets you install an EDSFF 1C Gen-Z SSD into a conventional PCIe x4 Gen4 slot when a native Gen-Z backplane is unavailable. The jump is worth it when you need to validate or deploy E1.S 5.9 mm drives in a standard server or workstation chassis. Built-in PERST#, WAKE#, CLKREQ# and PWRBRK# buffers preserve side-band signalling across the longer electrical path. Compliance with SFF-TA-1002 v1.3 and SFF-TA-1009 v2.0 ensures mechanical and electrical interoperability.
The card occupies a single PCIe x4 Gen4 expansion slot and provides a latched EDSFF 1C connector for the drive. On-board ReDriver and 100 MHz clock buffer extend reach for flexible cable routing inside the chassis. SMBus buffers and the I/O expander enable hot-swap power and reset management without additional host circuitry. The assembly supports the E1.S 5.9 mm form factor and follows the PCI Express Base Specification Rev 4.0 and PCIe CEM spec R4.0.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The adapter requires a PCI Express 4.0 x4 slot to deliver 16 GT/s differential pair signals through its built-in ReDriver.
The latch must be fully engaged until it clicks, otherwise the SMBUS I/O expander at address 0x41 cannot assert PWRDIS and SMBRST# control.
Verify the new drive complies with SFF-TA-1002 revision 1.3 and SFF-TA-1009 revision 2.0, and matches the 5.9 mm E1.S height.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?