Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts Gen-Z 1C EDSFF SSDs to PCIe x4 Gen4 with integrated ReDriver, clock buffer and SMBus controls for extended signal reach
This Innocard DP9504 Rev1.1 adapter converts a Gen-Z 1C EDSFF device to a PCI Express 4.0 x4 interface. It supports EDSFF 1C E1.S 5.9mm height SSDs with a built-in latch connector. The green PCB carries integrated signal conditioning for Gen 4 speeds.
The card plugs into a standard PCIe x4 slot and provides a ReDriver, clock buffer and multiple bus buffer gates for PERST#, WAKE#, CLKREQ# and PWRBRK#. These buffers extend 16 GT/s differential signals and 100 MHz clock over longer trace lengths and cables. An SMBus I/O expander at address 41 handles PWRDIS and SMBRST# control.
Use this when the host system lacks a native EDSFF 1C connector but has a free PCIe x4 Gen 4 slot. It adds hot-plug support and signal integrity for cable lengths that a direct backplane trace cannot cover. Not for builders who need a second card or a different EDSFF form factor.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Innocard |
| Model name | DP9504 Rev1.1 |
| Product color | Green |
| Adapter type | PCIe x4 Gen4 to Gen-Z 1C |
The on-board ReDriver extends the 16 GT/s differential pairs, while the 100 MHz clock buffer and PERST#, WAKE#, CLKREQ# and PWRBRK# gate buffers each push the electrical limit further for sustained high-speed operation.
The board draws only the small current needed for its ReDriver, clock buffer, SMBus expanders at address 0x41 and bus gate logic; no active cooling is required.
A PCI Express 4.0 x4 slot is required on the host side to mate with the adapter's gold-finger edge connector.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?