Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EDSFF gender changer converts SFF-8639 to PCIe 4.0 x4 with 12 V hot-plug power limited to 6.5 A and built-in clock buffer for longer cables
This adapter converts an SFF-8639 connector to a PCI Express 4.0 x4 interface. It is built for server and industrial environments that require hot-plug capability and out-of-band management. The board includes a clock buffer, SMBus switch and I/O expander to support Gen-Z 1C SSD control. Remote reset and wake functions are handled through dedicated translators.
The unit operates across an industrial temperature range and features a 30u” gold SFF-8639 connector for reliable mating cycles. A 12V hot-plug power circuit with eFuse protection limits current to 6.5A and provides programmable inrush slew rate. Thermal shutdown and fault alert protect the host, while back-to-back FET operation and 400W TVS ESD protection secure the 12V input and output rails.
The adapter delivers up to 6.5A at 12V through its eFuse-protected hot-plug circuit. Systems that require a different current limit or voltage rail cannot use this changer. Buyers needing higher current capacity or a different connector standard must select another solution.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | EDSFF |
The adapter converts an SFF-8639 connector to a PCIe 4.0 x4 link and includes a built-in 100 MHz clock buffer to drive longer traces and cables.
It has a built-in SFF-8639 connector with 30 µ” gold plating and a 12 V input protected by a 400 W TVS diode for ESD protection.
Install into a PCIe 4.0 x4 slot, connect 12 V power, then configure the SMBus switch at address 0x71 and the I/O expander at 0x41 for Gen-Z 1C PWRDIS control.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?