Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a PCIe 5.0 x4 add-in card to MCIO 38P and U.2 with a built-in ReDriver, clock buffer and SMBus management over a 50 cm cable
The Innocard EP4101 converts a PCI Express x4 Gen 5 link to an MCIO 38-pin interface with a 50 cm cable to U.2. A built-in ReDriver equalises signals up to 24 dB at 16 GHz to maintain 32 GT/s across four lanes. An on-board 100 MHz clock buffer and SMBus switch support longer trace lengths and out-of-band control.
The ReDriver continuously compensates insertion loss so the 5.0 GT/s per lane link remains stable under constant load. Clock buffering drives the 100 MHz reference across the 50 cm cable without degradation. PERST#, WAKE# and CLKREQ# translators keep side-band management active during extended operation.
The add-in card is designed and manufactured in Taiwan with 30 µ gold connectors. Bidirectional TVS protection, a 3 A load switch and reverse-current safeguard secure the 3.3 V supply. Four green LEDs indicate card readiness, WAKE#, CLKREQ# and general status for quick visual diagnostics.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen5 |
The on-board ReDriver equalises the 32 GT/s signal up to 24 dB at 16 GHz and the card draws 3.3 V at up to 3 A through a load switch with reverse-current protection, so heat output is limited to the adapter itself.
It installs in a PCIe x4 Gen 5 slot and connects via the included 50 cm MCIO 38P-to-U.2 (SFF-8639) cable to the target drive or backplane.
The adapter exposes a fixed SMBus switch at 0x71 and an I/O expander at 0x20 for PWRDIS control; check your BMC documentation to confirm no address clash with existing devices.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?