Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an M.2 PCIe 5.0 slot to MCIO 38P and U.2 with a built-in ReDriver for 32GT/s signal extension over 100cm
The EP7102 kit bridges an M.2 PCIe 5.0 slot to an MCIO 38-pin connector and includes a 100 cm MCIO-to-U.2 cable. An on-board ReDriver restores 32 GT/s differential pairs while a clock buffer drives the reference signals across the longer trace. Integrated load switching, SMBus level translation and PERST# translation manage hot-plug sequences for server or workstation backplanes.
The adapter draws 3.3 V through a 3 A load switch with reverse-current protection and controlled turn-on. No active cooling is fitted; the ReDriver and clock buffer dissipate modest heat within the connector shell. Green and red LEDs indicate rail readiness and PERST# status without adding audible noise or measurable airflow restriction.
Under continuous 32 GT/s traffic the ReDriver maintains eye opening across the 100 cm cable run, while the clock buffer preserves REFCLK integrity at the far end. SMBus repeater and voltage-level translation remain active during hot-swap cycles. The assembly targets PCIe 5.0 CEM 5.1 and SFF-TA-1016 1.2 compliance for extended operation.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen5 |
Plug the M.2 PCIe 5.0 edge connector into the motherboard M.2 slot, then attach the MCIO 38P cable to the adapter's MCIO port; ensure the cable's B11 and B12 pins carry REFCLKp and REFCLKn respectively, as reversing them breaks clock delivery.
The 3.3 V 3 A load switch, PCIe ReDriver, 100 MHz clock buffer, SMBus repeater and PERST# translator are surface-mount ICs; if any fails the entire adapter must be swapped as individual chips are not field-replaceable.
The 32 GT/s differential pairs hit attenuation and crosstalk limits first; the built-in ReDriver and clock buffer extend reach, but 100 cm is the practical ceiling before bit-error rates rise.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?