Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an MCIO 38P connection to M.2 PCIe 5.0 with a built-in ReDriver and clock buffer over a 50cm cable
This Innocard EP7102 kit converts an M.2 PCIe 5.0 slot to an MCIO 38P connector and includes a 50cm cable to a U.3 interface. A built-in ReDriver extends 32GT/s differential signals while a clock buffer drives longer trace lengths. The assembly is designed and made in Taiwan.
The adapter replaces a direct M.2 installation when the drive must sit farther from the host board. The jump is worth it when cable routing or chassis layout prevents a native M.2 connection and PCIe 5.0 signal integrity must be maintained across the 50cm link.
Under sustained load the on-board ReDriver and 100MHz clock buffer preserve 32GT/s signalling across the extended path. The 3.3V load switch with reverse-current protection and the SMBus repeater with hot-swap level translation keep power and side-band signals stable during continuous operation.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The kit converts a 38-pin MCIO connector (SFF-TA-1016) to an M.2 PCIe 5.0 slot with a 50 cm cable between them.
A bidirectional voltage-level translator routes PERST# to MCIO pin A11; connect the cable so the host drives PERST# through that pin.
Green LED1 lit means 3.3 V is ready; red LED2 lit means PERST# is asserted, and it turns off when PERST# de-asserts normally.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?