Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts dual-port MCIO 38P to PCIe x8 Gen 5 with a ReDriver, clock buffer, SMBus switch, I/O expander and signal buffers for extended reach
The Innocard EP8102 is a PCIe Gen5 gender changer that converts a single x8 lane into two MCIO 38P ports. It targets system integrators and lab engineers who need to extend high-speed signals to U.3 or similar backplanes. The board includes a ReDriver and clock buffer to maintain link integrity over longer traces. Status LEDs show PRSNT#, 3.3VAUX, 3.3V and inverted PERST#/WAKE# states.
Dual MCIO 38P connectors follow the SFF-TA-1016 pinout and ship with two 50 cm cables for rack-to-rack or tray-to-tray routing. A 100 MHz clock buffer at address 0x6C drives 100 ohm impedance for extended reach. An SMBus switch at 0x70 and an I/O expander at 0x20 provide four-channel control and out-of-band reset for each MCIO port. PERST#, WAKE# and CLKREQ# buffer gates further protect signal quality across the cable length.
Passive adapters cannot compensate for the insertion loss of 5.0 GT/s lanes over 50 cm or longer cables. The EP8102 adds active equalisation, clock regeneration and management buses so the link trains reliably at full width. The jump is worth it when the host-to-backplane path exceeds a few centimetres or when hot-plug and OOB management are required. It is not for builds that stay on a single PCB or use only short passive risers.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen5 |
The adapter converts MCIO 38P (SFF-TA-1016) dual-port signals to PCIe x8 Gen 5 using a built-in ReDriver for signal integrity.
The EP8102 includes two MCIO 38P connectors and two 50cm cables for dual-port connectivity.
Install by seating the PCIe x8 card in a Gen 5 slot, connecting both 50cm MCIO 38P cables, and verifying LED1 (AIC PRSNT#) and LED2/3 (3.3V rails) illuminate green.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?