Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adapter converts U.2 and SlimSAS 4i drives to PCIe x4 slots with hot-plug power protection and 6.5 A current limit
The Innocard GD0804A is a PCIe Gen4 adapter that converts a U.2 SFF-8639 connection and a SlimSAS 4i SFF-8654 connection each to a PCIe x4 slot. It is built for system integrators who need to attach enterprise U.2 or SlimSAS 4i storage devices to a standard PCIe x4 interface while keeping the link at Gen4 16GT/s speeds.
This adapter suits builders who require hot-plug capability with integrated eFuse protection on the 12V rail and a programmable 6.5A current limit for safe device insertion. It also provides SMBus buffering and specific pull-up or pull-down support for Broadcom 95xx Tri-Mode RAID or HBA controllers. Buyers needing a different connector family or lacking a PCIe x4 host slot should look elsewhere.
The single specification that decides fit is the dual-converter layout: one SFF-8639 U.2 port and one SFF-8654 SlimSAS 4i port, each wired to its own PCIe x4 slot under the SFF-9402 Rev1.1 pin-out. If the build calls for exactly those two source connectors feeding two separate x4 slots, this is the correct part; otherwise it is not.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
Yes, the GD0804A plugs into a PCIe x4 slot and provides two such slots for U.2 and SlimSAS 4i devices.
The adapter supports BP_TYPEA, BP_TYPEB pull-up and CPRSNTA#, CPRSNTB# pull-low signals for Broadcom 95xx PCIe 4.0 MegaRAID and HBA tri-mode adapters.
LED1 and LED5 illuminate when PCIe +12 V power is ready, indicating the hot-plug eFuse protection circuit is active.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?