Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts OCulink 4i to M.2 PCIe 4.0 with a built-in ReDriver for 16 GT/s signal extension
The Innocard M.2 Golden Edge PCIe Gen 4 ReDriver OCulink 4i adapter converts an OCulink 4i (SFF-8612) interface to an M.2 PCIe 4.0 slot. It integrates a PCIe ReDriver to extend 16 GT/s differential signals and includes a 100 MHz clock buffer for longer trace lengths. Built-in bidirectional buffers handle SMBus, PERST#, WAKE#, CLKREQ# and PWRDIS with voltage-level translation.
This adapter suits server, microserver, tower and high-performance computing builds that expose an SFF-8612 port and require an M.2 slot. Systems without an OCulink 4i connector or that rely on a different host interface cannot use this board. The design targets PCIe 4.0 signal integrity over extended cable runs in rack and accelerator deployments.
The on-board ReDriver restores 16 GT/s differential pairs while the 100 MHz clock buffer drives longer cables without signal loss. Voltage-level translators on PERST#, WAKE#, CLKREQ# and PWRDIS maintain side-band control across the SFF-8612 to M.2 boundary. Compliance with PCIe 4.0, OCulink 1.0a and SFF-9402 Rev 1.1 confirms the link budget for Gen 4 operation.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The adapter converts an OCulink 4i SFF-8612 connection to an M.2 PCIe 4.0 interface, so the host must supply an M.2 slot wired for PCIe 4.0 signalling at 16 GT/s.
Yes, the built-in PCIe ReDriver extends Gen 4 16 GT/s differential pairs and the 100 MHz clock buffer drives longer traces, so the link remains stable even when the far end negotiates down to an earlier PCIe generation.
The adapter has no LEDs; verify operation by checking that the OS enumerates the connected device at PCIe 4.0 speed and that CLKREQ#, PERST#, WAKE# and PWRDIS signals pass through the bidirectional voltage-level translators without errors.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?