Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts SlimSAS 4i to PCIe 4.0 M.2 with a built-in ReDriver for 16 GT/s signal extension
This adapter connects an M.2 M-key PCIe 4.0 device to a SlimSAS 4i (SFF-8654) host interface. It integrates a ReDriver, clock buffer and side-band repeaters to maintain 16 GT/s signal integrity over extended trace lengths and cables. The card targets rack, tower and micro-servers as well as high-performance compute and storage-controller deployments. It operates with Windows 7 through 10 and UEFI 2.3.1 or later.
Suitable for integrators who need to route Gen 4 links from a backplane or HBA to an M.2 slot while compensating for longer interconnects. The on-board ReDriver and buffers address clock, PERST#, WAKE# and CLKREQ# across those distances. Not suited for installations that require a different M.2 key, a PCIe 5.0 link, or a direct motherboard M.2 mount without a SlimSAS connection.
The defining specification is the built-in PCIe 4.0 ReDriver that sustains 16 GT/s differential pairs together with a 100 MHz clock buffer and SMBCLK/SMBDAT, PERST#, WAKE# and CLKREQ# repeaters. Compliance with SFF-8654 1.2, SFF-9402 1.1 and the PCIe M.2 Spec Rev 4.0 ensures the adapter meets the electrical requirements for extended cabling in server and accelerator applications.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
It requires an M.2 M-key slot on the motherboard and presents a SlimSAS 4i (SFF-8654) connector for the cable side.
Insert the adapter into the M.2 M-key slot, secure it with the mounting screw, then attach the SlimSAS 4i cable; the ReDriver and 100 MHz clock buffer activate automatically once the system powers on.
Replace the cable if its SFF-8654 connectors show bent pins or the cable jacket is kinked; replace the adapter only if the PERST#, WAKE# or CLKREQ# buffer gates fail to re-establish link after a reboot.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?