Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts Gen-Z 1C EDSFF devices to PCIe 4.0 M.2 using a built-in ReDriver and clock buffer for 16 GT/s signal integrity over longer cables
This adapter converts a Gen-Z 1C EDSFF connector to a four-lane PCI Express 4.0 M.2 slot. An onboard ReDriver extends 16 GT/s differential signals while a clock buffer and SMBus repeater maintain link integrity over longer traces. PERST# buffering supports extended cable runs in server and accelerator chassis.
Engineers adding Gen-Z storage or accelerator cards to platforms with M.2 sockets will find the mechanical and electrical conversion handled in one module. Systems without a Gen-Z 1C edge connector or without space for the adapter length cannot use this part.
The integrated ReDriver is the component that enables Gen 4 signal quality across the gender change. Without it, the 16 GT/s link would not meet the PCI Express Base Specification Rev 4.0 eye requirements over the combined connector and trace path.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
It complies with PCI Express Base Specification Rev 4.0 and the built-in ReDriver extends 16GT/s differential-pair signals across the Gen-Z 1C to M.2 conversion.
The adapter has a built-in Gen-Z 1C (EDSFF) connector on one side and converts to a PCIe 4.0 M.2 4-lane slot compliant with the M.2 Spec Rev 4.0 Ver 1.0.
The system must run UEFI 2.3.1 or later; legacy BIOS without UEFI support will not initialise the PERST# and SMBus buffers correctly.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?