Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts two SlimSAS 8i ports to four EDSFF 1C bays with per-port 12 V hot-swap power control and 6.5 A current limiting
This new Innocard adapter converts two SlimSAS 8i connectors into four EDSFF 1C ports for Gen-Z 1C devices. It targets system integrators building dense storage arrays that require hot-swap capability. The board implements the SFF-9402 Rev 1.1 pin-out and supports Broadcom 95xx Tri-Mode adapters through BP_TYPE and CPRSNT signal handling.
Each Gen-Z 1C port provides a programmable 6.5 A current limit with inrush slew-rate control and thermal shutdown. Back-to-back FET operation and per-port SMBus buffering enable true hot-plug serviceability. Green and red LEDs show power-ready and active status for every bay. The design complies with NVM Express 1.3 a and PCI Express Base Specification Rev 4.0.
Two SFF-8654 8i interfaces connect the adapter to a host RAID or HBA card, carrying PCIe 4.0 lanes and side-band signals. The bracket-mounted PCB fits standard chassis slots and requires no auxiliary power beyond the 12 V supply routed through the SlimSAS connectors. Builders gain four hot-swap bays without consuming extra motherboard PCIe slots.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
Yes, the adapter pulls BP_TYPEA and BP_TYPEB high and CPRSNTA# and CPRSNTB# low, matching the 95xx MegaRAID and HBA Tri-Mode pin-out.
Green LEDs 1, 3, 5, 7 show power ready; red LEDs 2, 4, 6, 8 blink to indicate active status on each port.
The product is the adapter board with four Gen-Z 1C ports and two SFF-8654 8i connectors; cables are not included.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?