Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A PCIe 4.0 x16 ReDriver with dual SlimSAS 8i ports extends 16GT/s signals over longer cables
This Innocard adapter converts a PCI Express 4.0 x16 slot to dual SlimSAS 8i ports using an integrated ReDriver. It extends 16 GT/s signal integrity across longer traces and cables for rack-server deployments. The board supports bifurcation of the 16 lanes into four x4 links for flexible topology configuration. It is built for new installations requiring reliable high-speed storage connectivity.
The adapter operates without active cooling and adds minimal power draw to the host system. Integrated bus buffers for PERST#, WAKE#, CLKREQ# and PWRBRK# maintain signal quality over extended cable runs without increasing thermal load. A green D1 LED indicates when the add-in card is ready for operation. Silent passive operation suits dense rack environments.
The onboard ReDriver and 100 MHz clock buffer preserve 16 GT/s throughput across all 16 lanes during continuous data transfer. SMBus switch with reset function and compliant SFF-8654 1.2 pin-out ensure stable link training over long durations. Firmware-level support for UEFI 2.3.1 and Windows 7 through 10 maintains compatibility under prolonged workloads. Bifurcation remains active without signal degradation.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Insert the card into a PCIe 4.0 x16 slot, connect SlimSAS 8i cables to the SFF-8654 ports, then verify the D1 green LED lights to confirm the AIC is ready and the PERST# buffer is active.
The on-board ReDriver and clock buffer are solid-state with no moving parts; only the SlimSAS 8i cables may wear from repeated insertion cycles and should be inspected periodically.
Signal integrity across the 16 lanes at 16 GT/s is the limiting factor; the built-in ReDriver and 100 MHz clock buffer extend reach, but cable length and trace quality ultimately bound sustained throughput.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?