Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts PCIe 4.0 x4 to M.2 or EDSFF 1C with integrated ReDriver and SMBus management
This adapter converts a single PCIe 4.0 x4 slot to either an M.2 NVMe SSD or an EDSFF 1C SSD. It includes a ReDriver that boosts signal integrity up to 17 dB at 16 GT/s, plus a 100 MHz clock buffer for extended trace lengths. On-board SMBus devices at addresses 0x21, 0x6C and 0x71 provide IPMI control and reset functions. Power enable and PERST# buffering support out-of-band management.
Builders who require a fixed M.2 slot without EDSFF capability should consider a simpler riser. Systems lacking SMBus management infrastructure cannot use the remote reset and power-control features. The card occupies one PCIe x4 slot, so platforms without a free x4 lane cannot accommodate it. Buyers needing dual-drive support must use two separate adapters.
The integrated ReDriver applies up to 17 dB gain on 16 GT/s differential pairs, while the 100 MHz clock buffer drives longer cables. SMBus addresses 0x6C and 0x71 enable BMC control of PERST#, WAKE# and CLKREQ# buffers. Independent 12 V and 3.3 V enable pins manage EDSFF and M.2 power domains. This signal conditioning decides whether the adapter works in your chassis.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The on-board ReDriver boosts 16 GT/s differential pairs by up to 17 dB and the PERST#, WAKE# and CLKREQ# buffer gates remain active over extended traces, so link training at Gen4 x4 confirms correct operation.
The card provides a built-in EDSFF 1C latch connector and an M.2 M-key slot; you choose one drive to install. No drive, mounting screws or external cables are supplied.
This single adapter supports both form factors — use the EDSFF 1C latch for 1C SSDs or the M.2 M-key socket for M.2 NVMe SSDs; only one drive fits at a time.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?