Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts SlimSAS 4i to PCIe 4.0 x4 with an integrated ReDriver and signal buffers for longer cable runs
This Innocard add-in card converts a PCI Express 4.0 x4 slot to a SlimSAS 4i (SFF-8654) connector. It is built for integrators who need to attach SFF-8654 storage or accelerator cables to a standard x4 slot in rack, tower or micro-servers and high-performance computing systems. The on-board ReDriver and clock buffer extend signal reach over longer traces and cables. A green D3 LED shows when the card is ready.
The card adds a PCIe 4.0 ReDriver, a 100 MHz clock buffer and SMBus, PERST#, WAKE#, CLKREQ# and PWRBRK# repeaters so the x4 link stays clean over extended trace lengths and cables. It replaces a straight-through passive bracket when the signal path exceeds what a bare connector can reliably drive. The jump is worth it whenever cable routing or backplane distance would otherwise degrade the Gen 4 link.
Under continuous traffic the ReDriver and buffer chain keep the 4.0 x4 lane group stable without the signal decay that appears in short bursts on unbuffered paths. The card complies with PCI Express Base Specification Rev 4.0 and SFF-8654 Version 1.2 and supports Windows 7, 8.1, 10 and UEFI 2.3.1 or later. It is not for builders who need a passive gender changer or who lack a free x4 slot.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The card fits a PCI Express 4.0 x4 slot and uses the x4 lane width for the built-in ReDriver to extend link signals.
The bracket carries a SlimSAS 4i (SFF-8654) connector whose pin-out is defined by SFF-9402 Rev 1.1.
The green D3 LED lights when the add-in card is powered and ready, showing the ReDriver and buffer circuits are active.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?