Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A PCIe 4.0 x4 adapter with integrated redrivers and buffers converts an OCuLink 4i port for extended cable runs in servers and HPC systems
This Innocard adapter converts an OCuLink 4i SFF-8612 connector to a PCIe x4 Gen 4 interface. It is built for rack servers, microservers and high-performance computing setups that need to extend PCIe signals over longer cables. The board integrates a ReDriver, clock buffer and multiple bus buffer gates to maintain signal integrity at 16 GT/s across extended trace lengths. A green D3 LED indicates when the host bus adapter is ready.
The adapter supports the PCI Express Base Specification Rev 4.0 and complies with SFF-8612 Version 3.5 and PCIe OCuLink 1.0a. It handles 16 GT/s differential pair signals and drives a 100 MHz clock buffer for longer cable runs. The design includes bidirectional SMCLK and SMDAT buffers at 3.3 V, plus PERST#, WAKE#, CLKREQ# and PWRBRK# bus buffer gates. Builders needing more lanes or a different connector type must look elsewhere.
The card fits Windows 7, Windows 8, Windows 8.1, Windows 10 and UEFI 2.3.1 or later environments. It requires an available OCuLink 4i port on the host side and a matching PCIe x4 slot or cable endpoint. The integrated buffers free the system from strict trace-length limits, allowing flexible placement of storage controllers or accelerators in tower servers and hardware-accelerator chassis.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The adapter complies with PCI Express Base Specification Rev 4.0 and uses a ReDriver to extend 16 GT/s signals, so it will operate at Gen 3 speeds in a Gen 3 slot while maintaining signal integrity over longer traces.
The D3 green LED illuminates when the Host Bus Adapter is ready, confirming power and link training have completed successfully on the PCIe x4 Gen 4 interface.
The adapter provides a built-in SFF-8612 connector defined by SFF-9402 Rev1.1; an OCulink cable is not included and must be sourced separately for your rack server or storage application.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?