Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts PCIe x8 Gen 4 signals to SlimSAS 8i with a ReDriver and clock buffer for extended cable reach
This Innocard adapter converts a PCI Express 4.0 x8 interface to a SlimSAS 8i connector following the SFF-8654 pin-out defined by SFF-9402 Rev 1.1. It is built for system integrators and hardware engineers who need to route eight lanes of 16 GT/s bandwidth through a slim cable assembly. The on-board ReDriver and clock buffer extend signal reach beyond standard trace limits.
Integrated PCIe ReDriver, 100 MHz clock buffer and bidirectional SMCLK or SMDAT repeaters maintain link stability at full Gen 4 speed across extended trace lengths and longer cables. PERST#, WAKE#, CLKREQ# and PWRBRK# bus buffer gates preserve side-band signalling so the link remains up under continuous load. A green D1 LED confirms the add-in card is powered and ready.
Passive adapters cannot compensate for insertion loss on long runs, so they fail at full 16 GT/s rates. This active ReDriver board is worth the upgrade when cable routing exceeds typical backplane distances or when a dense SlimSAS 8i connection must carry eight lanes reliably. It is not for builds that stay within short on-board trace lengths.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The built-in ReDriver and clock buffer extend the 16 GT/s signal over longer cables without adding active cooling, so power draw stays minimal and heat remains low during all-day operation.
It requires a free PCIe x8 Gen 4 slot and a SlimSAS 8i (SFF-8654) cable with pin-out defined by SFF-9402 Rev 1.1 to connect the target device.
Yes, the ReDriver and clock buffer support PCIe 4.0 at 16 GT/s and are backward compatible with Gen 3 speeds, so the adapter functions with older backplanes at their native rate.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?