Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects U.3 SFF-8639 host to EDSFF 1C SSD with 12 V hot-plug eFuse protection and status LEDs
This adapter converts a U.3 SFF-8639 interface to an EDSFF 1C connector with integrated 12 V hot-plug power protection. An on-board eFuse circuit safeguards the drive during insertion and removal while the host system remains powered. Compliance with PCI Express Base Specification Rev 4.0 and NVM Express 1.2 ensures full Gen-4 bandwidth for enterprise SSDs. LEDs report 12 V and 3.3 Vaux readiness, drive presence and Gen-Z activity at a glance.
The board targets engineers adding Gen-Z 1C SSDs to platforms that expose a U.3 backplane. Systems lacking a 3.3 Vaux supply must enable the JP1 header before use, so integrators without BIOS or BMC control over that rail should verify firmware support first. Workstations or consumer chassis without hot-plug backplane infrastructure fall outside the intended deployment scenario.
The integrated power IC manages inrush current and fault isolation when an EDSFF 1C drive is swapped live, preventing damage to both the SSD and the host backplane. This single hardware safeguard determines whether the adapter can be used in true hot-plug bays or must be restricted to cold-swap maintenance windows. All other signals — SMBus, PWRDIS, DualPortEn and presence detect — pass through unchanged.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | EDSFF |
The built-in 12V hot-plug power IC uses an eFuse protection circuit designed to handle hot-plug events without degradation, so no scheduled replacement is required.
The adapter complies with PCI Express Base Specification Rev 4.0, so the x4 lane bandwidth ceiling of that standard is the first limit under continuous load.
The board only carries the 12V eFuse IC, four status LEDs and a 3.3Vaux header, adding negligible heat and milliwatt-level draw beyond the SSD itself.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?