Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a PCIe 4.0 SFF-8673 link to dual U.2 NVMe ports with hot-swap power protection
This Innocard adapter converts a single SFF-8673 1x2 4X PCIe 4.0 interface into two U.2 NVMe SSD ports. It is built for users adding high-speed storage to servers or workstations that expose a Mini SAS HD connection. The board integrates dual U.2 SFF-8639 connectors and dedicated 12 V hot-plug power circuits with eFuse protection.
Verify that your system provides an SFF-8673 1x2 4X port wired for PCIe 4.0 at 16 GT/s and that the backplane can supply the required 12 V and 3.3 V rails. The on-board eFuse limits each port to a programmable 6.5 A current limit with controlled inrush slew rate. Ensure your chassis accommodates the dual U.2 drive height and that the SMBus hot-swap buffer matches your platform management.
The adapter has no active cooling; thermal performance depends on chassis airflow across the PCB and installed SSDs. Hot-plug power circuitry includes thermal shutdown protection and fault alert signalling to prevent damage during sustained loads. Green LEDs indicate power-ready status while red LEDs show drive activity and inverted PERST#, WAKE# and CLKREQ# states. Power draw scales with the attached NVMe drives and their workload.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The adapter provides two U.2 SFF-8639 connectors and dual 12V hot-plug power with eFuse protection. The U.2 NVMe SSDs themselves are not included and must be bought separately.
The internal SFF-8673 1x2 connector runs at PCIe 4.0, delivering a 16GT/s link that is split across the two U.2 ports for NVMe 1.4 drives.
Green LEDs (LED1 and LED3) light when 12V power is ready for each U.2 port. Red LEDs (LED2 and LED4) blink to indicate drive activity, while red LEDs 11–23 stay off during normal PERST#, WAKE# and CLKREQ# states.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?