Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Tri-mode adapter converts SlimSAS 4i and U.2 to dual PCIe x4 slots with 16GT/s Gen4 support, 6.5 A current limit and hot-plug power protection for Broadcom 95xx MegaRAID and HBA controllers
This Innocard adapter bridges SlimSAS 4i and U.2 connectors to dual PCIe x4 slots. It operates at PCIe Gen4 16GT/s and is designed for Broadcom 95xx series tri-mode storage adapters. The board includes active power management with eFuse protection on the 12 V rail and a synchronous buck converter for 3.3 V delivery. It is built in Taiwan.
Verify that the host system provides two physical PCIe x4 slots with electrical x4 links. Confirm the backplane uses SFF-8654 4i pin-out per SFF-9402 Rev 1.1 and that BP_TYPEA or BP_TYPEB pull-ups match the Broadcom 95xx requirement. Ensure the chassis can supply 12 V hot-plug power within the 6.5 A programmable current limit. The adapter also requires SMBus two-wire buffer support for hot-swap signalling.
This single card consolidates U.2 (SFF-8639) and SlimSAS 4i (SFF-8654) breakout functions that would otherwise need two adapters. The jump is worth it when deploying Broadcom 95xx PCIe 4.0 MegaRAID or HBA tri-mode controllers that demand both CPRSNTA# and CPRSNTB# pull-low detection. It also eliminates the need for discrete 12 V to 3.3 V conversion modules and external eFuse circuitry.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The adapter provides the SFF-8654 4i and SFF-8639 connectors on-board; SlimSAS 4i and U.2 cables are not included and must be purchased separately.
It is designed for Broadcom 95xx PCIe 4.0 MegaRAID and HBA Tri-Mode storage adapters using the BP_TYPE and CPRSNT pull-up/pull-low signals.
The x4 slot delivers up to 16 GT/s per lane, allowing each connected U.2 or SlimSAS 4i drive to run at full PCIe 4.0 x4 bandwidth without host-side bottlenecks.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?