Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a U.2 PCIe 4.0 drive to M.2 22110 form factor with sideband 3.3V or 1.8V switching and hot-plug power protection
This Innocard adapter converts a U.2 SFF-8639 port to an M.2 22x110mm NVMe slot with PCIe Gen 4 support. It includes a PWM 12V to 3.3V synchronous buck converter rated for 5.5A maximum output current. A built-in 3.3V hot-swap power controller handles up to 6.5A continuous current with programmable inrush slew rate. The board also provides 1.8V and 3.3V switching for sideband signals.
Mount the M.2 22x110mm NVMe SSD onto the adapter and connect the U.2 end to the host backplane or cable. The integrated hot-plug protection IC manages power sequencing and provides overcurrent, undervoltage, overvoltage and thermal shutdown safeguards. Green and red LEDs indicate power ready and drive activity status. An onboard 64KB SMBUS EEPROM stores configuration data. No driver installation is required for the adapter itself.
This adapter only accepts M.2 NVMe SSDs in the 22x110mm physical size. Shorter modules such as 2280 or 2230 will not mount correctly. The U.2 connector follows the SFF-8639 pin-out defined by SFF-9402 Rev1.1 and complies with NVM Express 1.3a. Builders needing a different M.2 length or a direct PCIe slot connection must choose a different adapter.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The green D1 LED lights up when M.2 NVMe SSD power is ready and the red D2 LED blinks to show active drive status.
The unit is a standalone GD1401A adapter board with a built-in SFF-8639 connector; you supply the U.2 host cable and the M.2 22x110mm NVMe SSD.
Yes, it supports M.2 3.3 V and 1.8 V supply plus 1.8 V switching on PERST#, CLKREQ# and WAKE# signals with level-shifted SMBus lines.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?