Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a U.3 SFF-8639 slot to an M.2 NVMe drive with PCIe Gen4 16GT/s speed and 3.3V or 1.8V sideband switching
This gender changer connects an M.2 NVMe solid-state drive to a U.3 SFF-8639 backplane or host connector. It is intended for integrators and technicians who need to install standard M.2 storage into enterprise-style U.3 bays. The adapter handles the physical and electrical conversion between the two form factors. It is not suited for users who require a direct M.2 to M.2 connection or a different drive interface.
The board operates at PCIe Gen4 16GT/s and provides power conversion from a 12V input to 3.3V for the M.2 SSD through a synchronous buck converter rated at 5.5A maximum output current with a programmable limit of 6.5A. It also supports M.2 1.8V supply and translates PERST#, CLKREQ# and WAKE# signals between 3.3V and 1.8V levels. Builders who need higher current delivery or a different voltage rail will find the on-board protection limits fixed.
The adapter uses a built-in SFF-8639 connector with 30u” gold plating and pin-out defined by SFF-9402 Rev1.1. Protection includes overcurrent, undervoltage lockout, over/under voltage, thermal shutdown, output discharge control and 400W TVS ESD protection on the 3.3V input plus 500V HBM ESD rating. A 32 m ohm NexFET and Schottky barrier rectifier manage the 3.3V output path. Installers who need a bare passive interposer without active power management or signal translation should look elsewhere.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The adapter is built for Gen 4 16 GT/s operation and uses an SFF-8639 connector pinned to SFF-9402 Rev 1.1, so the electrical path supports the full Gen 4 rate through to the M.2 slot.
The board includes a PWM 12 V to 3.3 V synchronous buck converter with 5.5 A maximum output, output discharge control, over-current protection at 6.5 A, under-voltage lockout and thermal shutdown — if the drive appears and stays online under load the power chain is working.
Only the adapter board is supplied; the M.2 NVMe SSD must be purchased separately.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?