Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an M.2 NVMe SSD to a U.3 SFF-8639 interface with PCIe Gen4 16GT/s support and built-in 3.3V power protection
This adapter converts an M.2 NVMe solid-state drive to a U.3 SFF-8639 interface. It supports PCIe Gen4 signalling at 16 GT/s and accepts 22x80mm M.2 modules. The board is designed and manufactured in Taiwan by Innocard.
A synchronous buck converter steps 12 V down to 3.3 V with a 5.5 A continuous rating and a programmable 6.5 A limit. Protection circuits include over-current, under-voltage lockout, over/under-voltage, thermal shutdown and output discharge control. Hot-plug power uses an eFuse and 400 W TVS diode for transient suppression.
Verify that your backplane or enclosure provides a U.3 SFF-8639 bay wired to PCIe Gen4 lanes. Confirm the slot can supply 12 V power and that the mechanical latch matches the SFF-8639 form factor. Ensure the host BIOS or operating system recognises NVMe devices behind a U.3 connector.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The built-in synchronous buck converter delivers up to 5.5 A at 3.3 V with over-current, under-voltage and thermal-shutdown protection to limit heat during all-day operation.
You need a U.3 (SFF-8639) backplane or cable that supplies a 12 V rail and the SFF-9402 Rev1.1 pin-out; the adapter plugs directly into that connector.
Yes, the on-board voltage-level translators handle PERST#, CLKREQ# and WAKE# at both 3.3 V and 1.8 V, so older 3.3 V-only drives remain compatible.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?