Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds four USB 3.0 ports to a 3.5" front bay via a 20-pin header with SATA power, delivering up to 900 mA per port
The IOGEAR U3-109 adds four USB 3.0 ports to a desktop front panel through a standard 3.5-inch drive bay. It connects to the motherboard via a 20-pin internal header and draws auxiliary power from a SATA connector. The hub uses a GL3520 chipset and supports USB 3.0, 2.0 and 1.1 speeds. It is intended for builders who want front-access USB ports without using a 5.25-inch bay.
The adapter has no active cooling and produces no audible noise during operation. Each port can deliver up to 900mA for device charging or operation, with total power supplied through the SATA connection. Power consumption scales with the number of attached devices and their individual draw. No fan or thermal management is required for normal desktop use.
The hub requires a motherboard with an available internal USB 3.0 20-pin header and a spare SATA power connector from the power supply. If the board lacks the 20-pin header or the PSU has no free SATA lead, the hub cannot be installed. Builders without those two connections should not buy this product.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | IOGEAR |
| Model name | U3-109 |
| Product type | USB |
| Product color | Blue |
| Ports & slots | |
| Connection type | USB C |
| Connector count | 16 |
| Size & build | |
| Overall length | < 6 ft |
| Conductor type | Copper Conductor |
| Compatibility | |
| Apple compatibility | Lightning connector |
Slide the hub into a free 3.5-inch front bay, secure it with screws, plug the 20-pin connector into the motherboard USB 3.0 header, then attach the SATA power lead from the PSU to the hub's SATA socket.
The GL3520 chipset runs on fixed firmware with no user updates; only occasional dust removal from the port openings is needed.
The 900 mA per-port current ceiling is reached first; each port is capped at 900 mA by the hub design.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?