Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adjustable buck converter delivers 1.25-32 V at up to 5 A with digital 0.1 V controls and built-in voltmeter
The JacobsParts DCMOD-G XL4015 steps a 5–36 V DC source down to an adjustable 1.25–32 V output with a peak capability of 75 W or 5 A. Onboard push-buttons let you set the voltage in 0.1 V increments while an integrated LED voltmeter toggles between input and output readings. The XL4015 IC runs at 180 kHz and achieves up to 96 % conversion efficiency in a 66 x 39 x 18 mm footprint.
Hobbyists powering 5 V USB gear or LED strips from a 12 V battery will appreciate the fine adjustment and constant-voltage regulation. The module is not suited for driving raw LEDs without external current limiting, and the input must stay at least 1.5 V above the desired output. Builds requiring sustained current above 3.5 A or power above 50 W should consider a different topology.
Continuous operation at the peak 75 W / 5 A rating is not supported; the sustained ceiling is 50 W or 3.5 A, whichever is lower. The board ships without a heatsink, so moderate to high continuous loads will need external cooling to keep the XL4015 IC within safe temperatures. Reverse-polarity protection is absent on both input and output terminals.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | JacobsParts |
| Model name | DCMOD-G |
| Product type | Power Converter |
The converter accepts 5V to 36V DC at its input terminals, and the input must be at least 1.5V higher than the output you set.
Yes, it steps a 12V battery down to the 1.25V–32V range your LED strips need, delivering up to 50W sustained or 75W peak while maintaining constant voltage regulation.
Press the onboard buttons to set the output in 0.1V steps, then use the built-in voltmeter — switchable between input and output — to verify the exact voltage appearing at the load terminals.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?