Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 9–32 V DC sources into a USB fast charger delivering 5 V 3.4 A, 9 V 2.5 A or 12 V 2 A with 90–97 % efficiency and multiple protection features
This step-down buck converter accepts any DC source between 9 and 32 volts and delivers USB fast charging at 5 V 3.4 A, 9 V 2.5 A or 12 V 2 A. It supports QC 2.0, QC 3.0, BC 1.2, MTK PE 1.1, PE 2.0, AFC and SFCP protocols. Conversion efficiency ranges from 90 to 97 percent depending on the input-to-output voltage gap. The board measures 34 by 17 by 9.5 mm and includes overvoltage, undervoltage, overcurrent, short-circuit and thermal protection.
Installers adding USB fast-charge ports to 12 V or 24 V vehicle systems, solar setups or portable battery packs will find the wide input range and multiple protocol support a direct fit. The tiny footprint suits tight enclosures and panel-mount projects. Builders needing AC mains input, isolated output or programmable voltage steps should look at alternative power-supply types because this module only performs non-isolated DC-to-DC conversion.
The single specification that determines whether this part works is the 9 to 32 volt DC input window. Your power source must stay inside this range under all load and temperature conditions. If the supply can dip below 9 volts or rise above 32 volts the module will not operate correctly and its protection circuits may shut it down.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | JacobsParts |
| Product type | Step-Up Voltage Regulator |
| Power | |
| Supply voltage | 12 V |
| Rated power | 24 W |
The module accepts any 9 V to 32 V DC supply, so a 12 V or 24 V battery, vehicle system or regulated adapter will work.
Yes — it supports QC 2.0, QC 3.0, AFC, MTK PE 1.1/PE 2.0, SFCP and BC 1.2, so older Quick Charge handsets will still fast charge at 9 V 2.5 A.
Measure the USB output with a multimeter; you should see 5 V, 9 V or 12 V depending on the device negotiation, and the built‑in protections will shut the output down if limits are exceeded.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?