Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A pair of 5 A XL4015 buck modules that step 8–36 V down to 1.25–32 V at up to 75 W peak with 95 % efficiency
This pack contains two XL4015-based step-down modules that convert a DC input of 8-36V to an adjustable 1.25-32V output. Each board handles up to 5A peak or 3.5A sustained, making them suited for hobbyists powering micro-controllers, LED strings, battery chargers or automotive accessories from a higher-voltage source.
The XL4015 IC and onboard LM358 op-amp deliver up to 95 % conversion efficiency, so a 24V-to-12V 1A test drew only 92.7 % losses as heat. At the sustained 50W limit the compact 51x26.3x14mm board stays cool without forced airflow, and the 180kHz switching frequency keeps ripple low for sensitive analog or digital loads.
Under continuous load the module maintains its rated 3.5A output as long as input voltage remains at least 1V above the set output and exceeds 5.6V for current-limit operation. Peak currents to 5A are allowed for short bursts, but prolonged operation at the 75W peak rating will raise temperature; designers should plan for the 50W continuous ceiling in enclosed projects.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | DC to DC |
Connect DC input to IN+ and IN- (8-36V) and load to OUT+ and OUT-. The input must be at least 1V higher than the set output; reversing polarity or using less than 5.6V input disables current limiting and can damage the board.
No scheduled maintenance is required. If sustained loads exceed 50W or 3.5A, or if the module overheats, the XL4015 IC can fail and the whole board must be replaced.
The sustained rating of 50W or 3.5A (whichever is reached first) is the limiting factor; above that the converter overheats and cannot maintain regulation.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?