Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds 12V 24W passive PoE power over Ethernet for IP cameras, phones and access points using standard Cat5, Cat5e or Cat6 cable
This passive Power over Ethernet injector combines data and 12V 2A power onto a single Cat5, Cat5e or Cat6 cable. It suits installers adding IP cameras, wireless access points or VoIP phones where no local mains socket exists. The unit plugs into a standard 120V wall outlet and delivers 24W through the spare pairs of an RJ45 link. It is built for indoor use with a compact black enclosure.
The injector replaces an individual wall wart and a separate data run for each powered device. The jump is worthwhile when cable routes are already in place and you need to add PoE capability without fitting an active switch. It supports 100Mbps Ethernet data on pins 1, 2, 3 and 6 while power rides on pins 4, 5, 7 and 8 in mode B. Devices that require active 802.3at or 802.3bt negotiation will not start up with this adapter.
Confirm the target equipment accepts 12V passive PoE on the spare pairs before ordering. The injector provides always-on power on pins 4, 5 positive and 7, 8 negative with no handshake. Verify the Ethernet cable length stays within 100 metres for reliable data and voltage delivery. Ensure a 120V mains socket is available at the injector location.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | JacobsParts |
| Model name | POEINJ-A |
| Product type | Power Supply |
| Product color | Black |
| Ports & slots | |
| Connector type | RJ45 |
| Size & build | |
| Product dimensions | 3.66 × 2.83 × 2.05 in |
| Product weight | 3.52 oz |
The injector measures 3.66 x 2.83 x 2.05 inches, so allow at least that depth plus cable bend radius behind the socket.
One RJ45 is the standard Ethernet data input from the switch; the other provides passive 802.3af mode B output with power on pins 4,5 and 7,8.
The AC prongs and RJ45 jacks are rated for typical insertions; no user-serviceable parts exist, so replace the whole unit if a port becomes intermittent.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?