Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Steps down 10.5-32V DC barrel input to 45W USB-C PD or USB-A QC3.0 output with 97% efficiency
The JacobsParts USBMOD-N converts a 10.5 to 32 volt DC barrel input into a 45 watt USB-C Power Delivery or USB-A Quick Charge 3.0 output. It is aimed at makers and integrators who need to add fast charging to existing 12 or 24 volt DC systems such as vehicle electrics, solar setups or industrial power rails. The module uses an IP6518 controller to negotiate voltage automatically from 3 to 20 volts. Only one output port may be active at a time.
The buck converter achieves up to 97 percent conversion efficiency, which keeps heat low during typical loads. Cable resistance compensation helps maintain voltage accuracy at the device end of the cable. Because the input must sit at least 2 volts above the negotiated output, the adapter draws minimal overhead when the source voltage is well matched to the required output level. No active cooling is fitted, so adequate airflow around the 50 by 20 by 17 millimetre body is recommended for sustained high-power operation.
This adapter replaces fixed-voltage USB chargers that cannot negotiate higher PD profiles or that lack QC 3.0 support on the Type-A port. It is a worthwhile jump when the source supply is a stable DC rail between 10.5 and 32 volts and the load requires flexible voltages up to 20 volts at 2.3 amps. It is not suitable for buyers who need simultaneous USB-C and USB-A charging, or for systems where the input voltage cannot stay 2 volts above the desired output voltage.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | JacobsParts |
| Model name | USBMOD-N |
| Product type | USB Type C |
| Power | |
| Supply voltage | 32 V |
Connect a 10.5-32V DC source to the 5.5x2.1mm barrel jack (centre positive), ensuring the input voltage stays at least 2V above the desired USB output voltage; do not use the USB-C and USB-A ports simultaneously.
The solid-state IP6518 controller has no moving parts, so no scheduled maintenance is required; replace the unit only if physical damage or overheating occurs.
Thermal limits of the 50x20x17mm enclosure will be reached before the 97% conversion efficiency can be sustained continuously at 45W output.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?