Jansicotek 20Km 4K@60Hz HDMI Fiber Optic USB KVM Extender Transceiver Kit
Extends 4K@60Hz HDMI, USB KVM and IR up to 20 km over LC fibre with zero-latency uncompressed video
- Product typeTransceiver
- Transfer speed10 Gbit/s
- Power adapterDC 12 V/1A
- HighlightsLong range transmission:up to 20 km over a single-mode/Multi
- In the boxHDMI extender Fiber transmitter ……………………1 pcs HDMI extender
- Extends HDMI up to 20 km over single-mode or multi-mode LC fiber
- Delivers 4K at 60 Hz and 1080p at 120 Hz without compression or latency
- Enables remote USB keyboard and mouse control plus bi-directional IR at 20–60 kHz
- Provides HDMI loop output on transmitter for local monitoring alongside the extended link
- Meets HDMI 2.0b and HDCP 2.2 standards with built-in ESD protection
20 km 4K HDMI Fiber KVM Extender Kit
This transceiver kit extends HDMI video, audio and USB keyboard-and-mouse control up to 20 kilometres over a single LC fibre link. It targets installers and operators who need to place a source such as a PC, PS4 or PS5 far from the display while keeping full KVM interaction.
Build integration with LC fibre and loop output
The transmitter and receiver each require the supplied 12 V/1 A power adapter and connect via one LC single-mode or multi-mode fibre strand. A local HDMI loop output on the transmitter lets a nearby monitor stay active, and bi-directional IR passthrough carries remote-control signals back to the source.
Upgrade from copper HDMI or basic extenders
Copper cables and short-range extenders cannot reach 20 km or carry uncompressed 4K at 60 Hz without signal degradation. This kit replaces them when distance, zero-latency KVM control and HDCP 2.2 compliance are required for professional AV, security or broadcast workflows.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $183.99
- Pricier than about 58% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Transceiver |
| Performance | |
| Transfer speed | 10 Gbit/s |
| Power | |
| Power adapter | DC 12 V/1A |
Questions about this item
Does the 10Gbps link ever saturate when I push 4K@60Hz video plus USB KVM traffic all day?
The extender runs at a fixed 10Gbps rate and the spec lists uncompressed 4K@60Hz with no loss or delay, so the bandwidth ceiling is built into the design.
How much heat or fan noise should I expect from the transmitter and receiver during continuous operation?
The units are powered by 12V/1A adapters with no fan mentioned, so they run silently and generate only modest warmth typical of low-power fiber transceivers.
What fiber cable and connectors must I already have to complete the 20km link?
You need a single-mode or multi-mode LC fiber optic cable up to 20km; the kit includes two LC SFP modules but the fiber itself is not supplied.
More in SFP & SFP+ Transceiver Modules
Similar items
TRENDnet TEG-10GBS10 10GBASE-LR SFP+ transceiver 1310nm 10km
- 10GBase-LR
- Transceiver
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
AddOn FTLX1471D3BCL-AO SFP+ transceiver 10 Gbps 1310nm 220m LC
- SFP+
- Finisar®
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
AddOn GLC-LH-SMD-AO-5PK SFP transceiver 10km 1310nm LC DOM 5-pack
- Cisco®
- Transceiver





