Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one DisplayPort 1.4 source to DisplayPort and HDMI 2.1 displays at up to 8K 30 Hz or 4K 120 Hz
The Jansicotek DisplayPort 1.4 splitter switch takes a single DP 1.4 input and drives two displays simultaneously via one DisplayPort 1.4 and one HDMI 2.1 output. It supports 8K at 30 Hz, 4K at 120 Hz and 1440p at up to 165 Hz on the DisplayPort side. The HDMI output tops out at 1440p 144 Hz. It is aimed at users who need mirrored or extended desktops across two monitors without swapping cables.
The unit requires the included USB 5 V power cable; it will not operate from the DisplayPort signal alone. Connect the source, attach both displays, then plug the power lead into any standard USB port. A frequent issue is forgetting the external power, which results in no signal or unstable output. Ensure both cables and monitors support the target resolution and refresh rate, as the switch passes through the native signal without scaling.
The switch handles a continuous 32.4 Gbps bandwidth stream, maintaining stable 8K 30 Hz or 4K 120 Hz output during extended sessions. It supports both SST mirror and MST extended modes without dropping frames when the host GPU and cables meet the required specifications. HDR metadata passes through unchanged. No active cooling is present, so the aluminium casing dissipates heat passively during prolonged operation.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | DisplayPort Switchers |
| Performance | |
| Bandwidth rating | High Speed 32.4 Gbit/s |
| Display | |
| Maximum supported resolutions | 8K@30 Hz 4K@120 Hz |
| Ports & slots | |
| Port count | 2 |
| Input ports | 1 x DisplayPort 1.4 |
| Output ports | DisplayPort1.4+HDMI 2.1 |
| In the box | |
| In the box | 1 X Directional DP to DP+HDMI Switcher 1 X DC 5 V power line 1 x instructions |
Connect the power line, attach monitors to both outputs, then check your OS display settings to verify each screen reports 8K at 30 Hz and that MST extended mode shows two independent desktops.
You need a DisplayPort 1.4 cable for the host input, plus one DisplayPort 1.4 cable and one HDMI 2.1 cable for the two outputs, along with monitors that support the desired resolution and refresh rate.
Select MST extended mode when you want independent desktops across both screens at up to 8K@30Hz or 4K@120Hz; choose SST mirror mode when both displays must show identical content.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?