Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Bi-directional HDMI 2.1 switch handles 2-in-1-out or 1-in-2-out at 8K@60Hz, 4K@120Hz and 1080P@240Hz with 48Gbps bandwidth
The Jansicotek bi-directional HDMI 2.1 switch routes 48 Gbps signals between two sources and one display or one source and two displays. It supports 8K at 60 Hz and 4K at 120 Hz, so gamers with a PS5 or Xbox Series X and creators driving an 8K monitor can share a single high-bandwidth port without swapping cables. Only one screen is active at a time.
If your graphics card or console has only one HDMI 2.1 output but you want to alternate between a living-room TV and a desktop monitor, this unit replaces manual cable changes. The jump is worth it when you need 4K 120 Hz or 8K 60 Hz on both screens and your existing cables are 3 metres or shorter. It will not pass 4K 120 Hz HDR from an RTX 3070 3080 3090 to an OLED CX display.
The switch maintains the full 48 Gbps link during long gaming sessions or video playback, provided every cable in the chain meets the same specification. Indicator LEDs show which path is live so you can verify the connection without interrupting the signal. Both displays cannot show an image simultaneously, and the 3-metre cable limit applies to each leg of the setup.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI Switchers |
| Performance | |
| Bandwidth rating | High Speed 48 Gbit/s |
| Display | |
| Maximum supported resolutions | 8K@60 Hz 4K@120 Hz |
| Ports & slots | |
| Port count | 2 |
| Input ports | 2 x HDMI 2.1 |
| Output ports | 1 x HDMI 2.1 |
| In the box | |
| In the box | 1 X Bi-Directional HDMI Switcher 1 X DC 5 V power line 1 x instructions |
Each HDMI cable connected to the switch must not exceed 3 metres to maintain 48 Gbps bandwidth for 8K@60Hz or 4K@120Hz signals.
Connect the included DC 5 V power line, then press the button to toggle between 2-in-1-out and 1-in-2-out; the dual indicator lights show the active mode.
The unit has no user-serviceable parts; only the supplied DC 5 V power cable would need replacement if it becomes damaged.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?