Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Routes three HDMI 2.1 sources to one display at 8K 60 Hz or 4K 120 Hz with 48 Gbps bandwidth, IR remote and manual switching
This Jansicotek HDMI 2.1 switch routes three source devices to a single display, supporting 8K at 60 Hz and 4K at 120 Hz. It handles HDCP 2.3, HDR10, HDR10+, Dolby Vision and VRR for compatible consoles, PCs and streaming sticks. Audio formats include LPCM, Dolby TrueHD, DTS-HD Master Audio, Dolby-AC3 and DTS 7.1. A USB-C power port and IR receiver are built in.
The switch maintains the full 48 Gbps bandwidth required for uncompressed 8K and high-refresh 4K video during extended sessions. Switching between inputs takes roughly one to two seconds whether triggered by the front button or the IR remote. LED indicators show the active input at all times. No signal degradation is introduced across the supported resolutions and colour formats.
The aluminium enclosure dissipates heat without a fan, so operation stays silent in normal use. A 5 V 1 A USB-C supply powers the unit, drawing minimal current from the wall. Dimensions are 7 by 5.7 by 1.2 inches and weight is 185 grams, allowing discreet placement behind a TV or monitor. The IR remote works reliably up to 15 feet.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI Switchers |
| Adapter type | HDMI Switch/Extender |
| Product color | Black |
| Ports & slots | |
| Port count | 3 |
It runs on a 5 V 1 A supply and weighs 185 g, so heat output stays low even when powered continuously.
You need three HDMI 2.1 source devices and matching cables; the switch adds one IR 3.5 mm receiver and a USB-C power port.
Yes, the switch is backward compatible with 4K 60 Hz and lower resolutions while still passing 48 Gbps bandwidth.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?