Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects four HDMI sources to four displays at up to 4K@30Hz with IR remote and front-panel switching
The Jansicotek HDMI Matrix Switch 4x4 routes four HDMI sources to four displays, supporting switching and splitting in home theatres, classrooms, retail spaces and control rooms. It handles resolutions up to 4096 x 2160 with YUV 4:2:0 4K at 30 Hz and 1080p at 60 Hz. An IR remote and front-panel buttons provide control, with a three-to-five-second delay when changing routes. Audio passes through in PCM, Dolby AC3, DTS 5.1, DTS 7.1 and DSD formats.
Confirm each source device outputs HDMI 1.4 signals within the supported resolution and refresh-rate limits. Use AWG26 HDMI 1.4 standard cables no longer than eight metres on both input and output sides. The unit does not perform EDID management, so source devices must negotiate compatible formats without assistance. Ensure your sources can deliver 3D or 3440 x 2160 at 30 Hz if those modes are required.
The matrix fits into multi-zone installations where four sources must reach four screens independently or simultaneously. It frees up manual cable swapping and works alongside splitters, extenders and converters from the same ecosystem. Power the unit, connect sources and displays within the eight-metre cable limit, then use the IR remote or front buttons to route any input to any output. No EDID configuration is needed, simplifying deployment in conference rooms, video walls and digital-signage setups.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI Switchers |
| Adapter type | HDMI Switch/Extender |
| Product color | Black |
| Display | |
| Maximum supported resolutions | 4096 × 2160 |
| Audio & video | |
| Matrix switching | Yes |
| Sound | Yes |
| Ports & slots | |
| Port count | 4 × 4 Matrix |
The unit itself is supplied without HDMI cables. You will need eight cables — four for the inputs and four for the outputs — each rated for HDMI 1.4 and no longer than 8 metres if you use AWG26 wire.
Select 4K@30Hz YUV 4:2:0 when your source and display both support 3440x2160 at 30 Hz and you need the higher pixel count. Use 1080p@60Hz for smoother motion on 1080p screens or when cable runs approach the 8-metre limit.
The 10.2 Gbps limit carries 4K@30Hz in YUV 4:2:0 colour sampling, plus 3D formats and audio such as PCM, Dolby AC3, DTS 5.1, DTS 7.1 and DSD. It will not pass full 4:4:4 4K@60Hz signals.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?