Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Routes four HDMI sources to two displays at 4K 60Hz with 18.5Gbps bandwidth, HDCP 2.2 and simultaneous optical, 3.5mm and HDMI audio extraction
The Jansicotek OZJ1 is a 4x2 HDMI matrix switch that routes four source devices to two displays independently. It handles 4K resolution at 60 Hz with 18.5 Gbps bandwidth and HDCP 2.2 compliance. The unit extracts audio through SPDIF, 3.5 mm stereo and HDMI simultaneously. An aluminium enclosure aids heat dissipation.
This matrix suits installers who need independent source selection on two screens with separate audio zones. It supports 3D formats and deep colour up to 48-bit. Buyers requiring more than two output zones or switching latency below one frame should evaluate alternative architectures. The fixed 10 metre cable limit at full bandwidth also restricts long-run deployments.
The 18.5 Gbps ceiling determines whether 4K 60 Hz 4:4:4 signals pass without compression. At this data rate the switch transports 3840 x 2160 at 60 Hz with 8-bit colour. Higher bit-depths or refresh rates such as 2K 144 Hz may require chroma subscaling. Verify source and sink EDID settings match this throughput before purchase.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Product line | OZJ1 |
| Model name | OZJ1 |
| Part number | OZJ1 |
| Product type | HDMI Switchers |
| Adapter type | HDMI Switch/Extender |
| Product color | Black |
| Performance | |
| Bandwidth rating | 18.5 Gbit/s/600 MHz |
| Display | |
| Maximum supported resolutions | 4K@60 Hz |
| Audio & video | |
| Matrix switching | Yes |
| Sound | Yes |
| Ports & slots | |
| Port count | 4 |
| Input ports | 4 x HDMI |
| Output ports | 2 x HDMI |
| Size & build | |
| Max cable length | 10m AWG26 HDMI2.0b standard cable |
| Product dimensions | 5.91 × 2.36 × 0.79 in |
| Product weight | 11.9 oz |
| In the box | |
| Units per package | 1 |
| In the box | 1x HDMI Matrix 4 × 2 1x 5 V power adapter 1x IR Remote Control(Battery is not included) 1x User Manual |
The 4x2 matrix lets each display show a different source simultaneously, while a 4x1 switch can only send one source to a single display at a time.
It carries full 4K 60Hz RGB 4:4:4, HDR10 and up to 48-bit deep colour without compression, so the TV receives the exact signal the source outputs.
HDCP 2.2 allows playback of 4K 60Hz protected streams; older HDCP 1.4 sources or displays will fall back to 4K 30Hz or 1080p.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?