Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4×4 HDMI matrix routes four sources to four displays at 4K 60 Hz with HDR, 18.5 Gbps bandwidth and IR remote control
This Jansicotek OZJ4 unit connects four HDMI sources to four displays in any combination. It handles 4K@60Hz signals with 18.5Gbps bandwidth and HDCP 2.2 compliance. Installers and AV integrators use it to route consoles, PCs or media players to multiple screens or projectors without re-cabling. It is not suited for setups needing more than four inputs or outputs.
The built-in EDID learning function reads connected displays or loads pre-programmed tables so sources output the correct resolution automatically. A supplied IR remote switches inputs per output from across the room, removing the need for front-panel buttons. After EDID changes a power-cycle of the matrix is required. No software utility or network control is included.
The black enclosure measures 230*90*25mm and weighs 11.9 ounces, fitting on a shelf or in a shallow rack tray. All four inputs and four outputs sit on the same side, keeping cable runs tidy and visible. Maximum certified cable length is 8m with AWG26 HDMI 2.0b leads; longer runs may need active cables or fibre extenders not supplied.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Product line | OZJ4 |
| Model name | OZJ4 |
| Part number | OZJ4 |
| Product type | HDMI Switchers |
| Adapter type | HDMI Switch/Extender |
| Product color | Black |
| Performance | |
| Bandwidth rating | 18.5 Gbit/s/600 MHz |
| Display | |
| Maximum supported resolutions | 4K@60 Hz |
| Audio & video | |
| Matrix switching | Yes |
| Sound | Yes |
| Ports & slots | |
| Port count | 4 × 4 Matrix |
| Input ports | 4 x HDMI |
| Output ports | 4 x HDMI |
| Size & build | |
| Max cable length | Less than 8m AWG26 HDMI2.0b standard cable |
| Product dimensions | 5.91 × 2.36 × 0.79 in |
| Product weight | 11.9 oz |
| In the box | |
| Units per package | 1 |
| In the box | 1x HDMI Matrix 4 × 4 1x 12 V power adapter 1x IR Remote Control 1x User Manual |
The unit stores EDID settings in non-volatile memory; the IR remote uses a fixed code set, so neither requires reprogramming unless you manually reset the matrix.
The 8-metre AWG26 cable limit is set by HDMI 2.0b signal integrity; longer runs need active fibre or HDBaseT extenders to keep 18 Gbps error-free.
No fan is fitted; the aluminium enclosure dissipates the low switching load passively, so surface temperature stays warm but within spec during continuous operation.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?